Clearing Hobbs time from the Times Tab

Clearing Hobbs time from the Times Tab

If Hobbs Times have been entered accidentally in FOS you are able to clear them from the Times Tab in FOS by following the steps below.  

1. Open the Flight Log where the hobbs times were entered by mistake or incorrectly.  
2. Amend the Flight Log and clear or adjust the hobbs times that have been entered. Click OK to save the record.  
3. Open the Aircraft Record and navigate to the AC Log.  
4. Select the most recent user entered log entry (in some cases there may only be one user created logbook entry that was made when initially using FOS). 
5. Click on the Recalculate A/C Log button.
 


6. You will receive the message below. Click OK to recalculate the Aircraft Logbook.
 


7. Navigate to the Times Tab and click on the Recalc Button. The Hobbs Times will now be either cleared or reflected correctly.  

    • Related Articles

    • Times Tab

      The “Times” Tab determines how certain time calculations are made within FOS. This includes aircraft and crew calculations for duty and rest time, logbook entries, start times, etc. The tab also includes several other features including, distance and ...

    • Time Tab

      The Time tab with an airport record can be used for checking the operating times for each airport. Most of the data on this tab will be populated by the Airport Update. The Attendance Field will usually give a brief description of the operating ...

    • Tracking Prop Times in FOS

      First confirm in the Aircraft Type Record the correct number of engine accessories is entered. Then you will be able to add the Prop information on the Specs Tab of the Aircraft as shown below. You are able to select how or where you would like to ...

    • CASS Tab

      The section was originally created to allow information on squawks, MEL’s, part replacement, etc. The data is entered and then reported to the FAA for operator bound by the requirements of the Continuing Analysis and Surveillance System. This may ...

    • Status Tab

      The Status Tab allows users to review the number of successful transmissions that have occurred for each activated interface within FOS since the interface manager was last started. Footer Options: Update Now- This option will update all interfaces ...